{"id":980,"date":"2016-11-30T21:58:14","date_gmt":"2016-11-30T19:58:14","guid":{"rendered":"http:\/\/eero.storijapan.net\/log\/?p=980"},"modified":"2016-11-30T21:58:14","modified_gmt":"2016-11-30T19:58:14","slug":"20161130-2","status":"publish","type":"post","link":"https:\/\/eero.storijapan.net\/docfolio\/20161130-2\/","title":{"rendered":"20161130"},"content":{"rendered":"

A list of\u00a0filenames of the recordings we made with Jesse last weekend (excluding b,c,\u2026 versions of\u00a0the same tools\/work-phases). I’ve been mastering the samples using Logic Pro X. After a frustrating\u00a0day with\u00a0tutorials I found a decent\u00a0workflow. We recorded two files on each take. A master and secondary-file in\u00a0-6db (Tascam Dr-40 can simultaneously\u00a0write\u00a0two files from the same input). If the monitored master has peaked, I can repair it using the secondary-file. In Logic Pro X I have each file is on separate track. After tweaks I can select both as a “region” and then “bounce the region in place” on a new track, which can be exported. It will take me two weeks of daily work to master the entire collection (But I hope to have some test samples ready for the weekend).<\/p>\n

I contacted Atlas Copco company in Helsinki and told them about our audio-archeological project (Majority of the hammer and drill tools we recorded were old Atlas Copco). They were pleased to hear about the project and promised to send a Atlas Copco branded cap for Jesse! It remains to be seen if something will develop from the engagement with the company.<\/p>\n

<\/p>\n

Sound of Work: Blacksmith vol.1 (extract)<\/em><\/p>\n

angle-grinder<\/em>
\n anvil<\/em>
\n belt-grinder<\/em>
\n compressor<\/em>
\n dust-collector<\/em>
\n furnace<\/em>
\n gas-furnace<\/em>
\n misc<\/em>
\n pneumatic-tools<\/em>
\n power-hammer<\/em>
\n torch<\/em>
\n welding-electric<\/em>
\n x_smithy-binaural<\/em><\/p>\n

.\/angle-grinder:<\/em>
\n 64_hilti-230_1-ignition_a.wav<\/em>
\n 68_milwaukee-125_1-ignition_a.wav<\/em>
\n 72_fein-125_1-ignition_a.wav<\/em>
\n 80_hilti-230_5-cut_a.wav<\/em>
\n 82_fein-230_4-grind_a.wav<\/em><\/p>\n

.\/anvil:<\/em>
\n 01_lokomo-a-100kg-cold_on-back_a.wav<\/em>
\n 05_lokomo-a-100kg-cold_on-low-back_a.wav<\/em>
\n 10_lokomo-125kg-cold_16mm-steel_a.wav<\/em>
\n 12_lokomo-125kg-cold_3mm-steel_a.wav<\/em>
\n 15_lokomo-a-100kg-cold_st_on-back_a.wav<\/em>
\n 16_lokomo-a-100kg_red-glow_a.wav<\/em>
\n 17_lokomo-a-100kg_yellow-glow_a.wav<\/em>
\n 18_lokomo-a-100kg_white-glow_a.wav<\/em>
\n 19_lokomo-a-100kg_st_yellow-glow_a.wav<\/em>
\n 7_lokomo-125kg-cold_6mm-steel_a.wav<\/em>
\n 9_lokomo-125kg-cold_16mm-steel_a.wav<\/em><\/p>\n

.\/belt-grinder:<\/em>
\n 192_arboga_on-of_a.wav<\/em>
\n 193_arboga_grinding-steel_a.wav<\/em><\/p>\n

.\/compressor:<\/em>
\n 84_compressor-unbranded_on-off_a.wav<\/em><\/p>\n

.\/dust-collector:<\/em>
\n 195_suomen-puhallintehdas-oy_nozzle_a.wav<\/em>
\n 196_suomen-puhallintehdas-oy_nozzle-from-angle_a.wav<\/em>
\n 197_suomen-puhallintehdas-oy_nozzle-from-far_a.wav<\/em><\/p>\n

.\/furnace:<\/em>
\n 55_adding-coal_a.wav<\/em>
\n 56_ignition_a.wav<\/em>
\n 57_coal-burning-far_a.wav<\/em>
\n 58_coal-burning-close_a.wav<\/em>
\n 59_coal-burning-fan-on_a.wav<\/em>
\n 60_coal-burning-adding-coal_a.wav<\/em><\/p>\n

.\/gas-furnace:<\/em>
\n 30_ignition_a.wav<\/em><\/p>\n

.\/misc:<\/em>
\n beer-bottle<\/em>
\n chain-pulley<\/em>
\n chimney<\/em>
\n clamp<\/em>
\n drill-press<\/em>
\n gas-cylinder<\/em>
\n hose<\/em>
\n match<\/em>
\n ratchet<\/em>
\n silence<\/em>
\n spoken<\/em>
\n steel<\/em>
\n toolcase<\/em>
\n wood<\/em><\/p>\n

.\/misc\/beer-bottle:<\/em>
\n 208_beer-bottle-pop_a.wav<\/em><\/p>\n

.\/misc\/chain-pulley:<\/em>
\n 198_chain-pulley-750kg_up_a.wav<\/em><\/p>\n

.\/misc\/chimney:<\/em>
\n 211_chimney_open-close_a.wav<\/em>
\n 212_chimney_st_open-close-far_a.wav<\/em><\/p>\n

.\/misc\/clamp:<\/em>
\n 216_clamp_a.wav<\/em><\/p>\n

.\/misc\/drill-press:<\/em>
\n 226_drill-press_trough_a.wav<\/em>
\n 229_drill-press_running_a.wav<\/em><\/p>\n

.\/misc\/gas-cylinder:<\/em>
\n 181_gas-cylinder_clang_a.wav<\/em>
\n 182_gas-cylinder_clang-clang_a.wav<\/em>
\n 183_gas-cylinder_clang-demp_a.wav<\/em><\/p>\n

.\/misc\/hose:<\/em>
\n 175_hose-remove_a.wav<\/em>
\n 177_hose-remove-plung_a.wav<\/em>
\n 178_hose-remove_a.wav<\/em>
\n 179_hose-connect_a.wav<\/em>
\n 88_hose-leak_rhythm_a.wav<\/em>
\n 91_hose-leak_free_a.wav<\/em><\/p>\n

.\/misc\/match:<\/em>
\n 37_match_a.wav<\/em>
\n 38_match_st_a.wav<\/em><\/p>\n

.\/misc\/ratchet:<\/em>
\n 201_ratchet-vlc_a.wav<\/em>
\n 203_ratchet-stahlwille_a.wav<\/em>
\n 204_ratchet-drill_a.wav<\/em><\/p>\n

.\/misc\/silence:<\/em>
\n silence-a.wav<\/em><\/p>\n

.\/misc\/spoken:<\/em>
\n 210_blacksmith-drink_a.wav<\/em>
\n 34_blacksmith-ok_a.wav<\/em>
\n 36_blacksmith-clear-clang_a.wav<\/em><\/p>\n

.\/misc\/steel:<\/em>
\n 108_hot-steel-to-water_a.wav<\/em>
\n 184_steel-drop_chain_a.wav<\/em>
\n 187_steel-drop_angle_a.wav<\/em>
\n 189_steel-drop_ring_a.wav<\/em>
\n 190_steel-drop_all_a.wav<\/em>
\n 217_steel-drop_to-forge_a.wav<\/em>
\n 224_hot-steel-to-wood_a.wav<\/em><\/p>\n

.\/misc\/toolcase:<\/em>
\n 205_toolcase_open-close_a.wav<\/em>
\n 206_toolcase-big_close_a.wav<\/em>
\n 214_toolcase-drawer_open-close_a.wav<\/em><\/p>\n

.\/misc\/wood:<\/em>
\n 213_axe-on-wood_a.wav<\/em>
\n 39_steel-on-wood_a.wav<\/em>
\n 42_wood-on-wood_st_a.wav<\/em><\/p>\n

.\/pneumatic-tools:<\/em>
\n angle-grinder<\/em>
\n chipping-hammer<\/em>
\n chisel-hammer<\/em>
\n cutter<\/em>
\n drill<\/em>
\n hammer<\/em>
\n needlegun-scaler<\/em>
\n riveting-hammer<\/em>
\n screw-gun<\/em>
\n straight-grinder<\/em><\/p>\n

.\/pneumatic-tools\/angle-grinder:<\/em>
\n 145_uryu-uag-50_start_a.wav<\/em><\/p>\n

.\/pneumatic-tools\/chipping-hammer:<\/em>
\n 94_holman-nc4_start_a.wav<\/em>
\n 99_holman-nc4_st_start_a.wav<\/em><\/p>\n

.\/pneumatic-tools\/chisel-hammer:<\/em>
\n 103_atlas-copco-rrc-22f_forging-red-glow_a.wav<\/em>
\n 85_atlas-copco-rrc-22f_start_a.wav<\/em><\/p>\n

.\/pneumatic-tools\/cutter:<\/em>
\n 147_desoutter-ts-144_start_a.wav<\/em><\/p>\n

.\/pneumatic-tools\/drill:<\/em>
\n 124_desoutter-drill_trough_a.wav<\/em>
\n 125_atlas-copco-rab-3_trough_a.wav<\/em>
\n 128_desoutter-drill_run_a.wav<\/em>
\n 129_desoutter-drill_start_a.wav<\/em>
\n 130_atlas-copco-lbb41_start_a.wav<\/em>
\n 131_fama-x-41_start_a.wav<\/em>
\n 132_fama-x-41_run_a.wav<\/em>
\n 133_atlas-copco-lbv-45_start-growl_a.wav<\/em>
\n 134_atlas-copco-lbv-45_run_a.wav<\/em>
\n 135_atlas-copco-npk-nrd14r_start_a.wav<\/em>
\n 136_atlas-copco-npk-nrd14r_play_a.wav<\/em>
\n 138_atlas-copco-npk-nrd-14r_run_a.wav<\/em>
\n 139_atlas-copco-npk-nrd-14r_run-play_a.wav<\/em>
\n 140_atlas-copco-unknown_run-play_a.wav<\/em>
\n 141_atlas-copco-unknown_through_a.wav<\/em>
\n 142_atlas-copco-d2-112_start_a.wav<\/em>
\n 143_atlas-copco-a3419_start_a.wav<\/em>
\n 144_uryu-brd-10p_start_a.wav<\/em>
\n 148_fuji-f-7vh_start_a.wav<\/em>
\n 151_fuji-f-7vh_run_a.wav<\/em>
\n 152_pluto-hb-25r_start_a.wav<\/em>
\n 153_pluto-hb-25r_run-slow_a.wav<\/em>
\n 154_pluto-hb-25r_run-fast_a.wav<\/em>
\n 155_pluto-hb-25r_run_a.wav<\/em>
\n 156_the-cleveland-pneumatic-tool-company-103b_start_a.wav<\/em>
\n 157_the-cleveland-pneumatic-tool-company-103b_run_a.wav<\/em>
\n 165_ingersoll-rand-5040t_start_a.wav<\/em>
\n 167_ingersoll-rand-5040t_run_a.wav<\/em>
\n 168_ingersoll-rand-52b_start_a.wav<\/em>
\n 173_atlas-copco-bv7_run-low_a.wav<\/em>
\n 174_atlas-copco-bv7_run-play_a.wav<\/em><\/p>\n

.\/pneumatic-tools\/hammer:<\/em>
\n 100_atlas-copco-r-4n_st_start_a.wav<\/em>
\n 101_atlas-copco-r1_st_start_a.wav<\/em>
\n 106_atlas-copco-r-4n_forging-red-glow_a.wav<\/em>
\n 89_atlas-copco-r1_start_a.wav<\/em>
\n 92_atlas-copco-r-4n_start_a.wav<\/em>
\n 98_deprag-zn-231-pb_start_a.wav<\/em><\/p>\n

.\/pneumatic-tools\/needlegun-scaler:<\/em>
\n 158_needlegun-scaler-unbranded_on-metal_a.wav<\/em><\/p>\n

.\/pneumatic-tools\/riveting-hammer:<\/em>
\n 96_ingersoll-rand-8a_start_a.wav<\/em>
\n 97_hammer-ingersoll-rand-8a_start_a.wav<\/em><\/p>\n

.\/pneumatic-tools\/screw-gun:<\/em>
\n 159_screw-gun-no-brand_start-on-bentch_a.wav<\/em>
\n 160_screw-gun-no-brand_run-on-bentch_a.wav<\/em>
\n 162_chigaco-pneumatic-model-a_start-on-bentch_a.wav<\/em>
\n 163_chigaco-pneumatic-model-a_run_a.wav<\/em>
\n 164_screw-gun-no-brand_run_a.wav<\/em><\/p>\n

.\/pneumatic-tools\/straight-grinder:<\/em>
\n 111_ straight-grinder-unbranded_start_a.wav<\/em>
\n 113_ straight-grinder-unbranded_run_a.wav<\/em>
\n 114_atlas-copco-g2412_start_a.wav<\/em>
\n 117_atlas-copco-g2412_grind_a.wav<\/em>
\n 118_atlas-copco-g2412_run_a.wav<\/em>
\n 119_hempstead-ata-hemel-st24le_start_a.wav<\/em>
\n 121_hempstead-ata-hemel-st24le_grind-wood_a.wav<\/em>
\n 122_hempstead-ata-hemel-st24le_run_a.wav<\/em><\/p>\n

.\/power-hammer:<\/em>
\n 44_billeter-klunz-50kg_exhaust-vent_a.wav<\/em>
\n 47_billeter-klunz-50kg_flat-belt-drive_a.wav<\/em>
\n 51_billeter-klunz-50kg_suction-vent_a.wav<\/em>
\n 52_billeter-klunz-50kg_st_exhaust-vent_a.wav<\/em>
\n 61_billeter-klunz-50kg_forging-red-glow_a.wav<\/em><\/p>\n

.\/torch:<\/em>
\n 20_torch-welding_ignite-bang_a.wav<\/em>
\n 219_torch-cutting_ignition_a.wav<\/em>
\n 21_torch-welding_ignite-soft_a.wav<\/em>
\n 220_torch-cutting_ignition-and-cut_a.wav<\/em>
\n 221_torch-cutting_ignition-and-bang_a.wav<\/em>
\n 22_torch-welding_ignite-bang_a.wav<\/em>
\n 23_torch-welding_gas-run_a.wav<\/em>
\n 24_torch-welding_bang_a.wav<\/em>
\n 25_torch-welding_flame_a.wav<\/em>
\n 26_torch-welding_ignite_a.wav<\/em>
\n 29_torch-welding_ignite-play_a.wav<\/em><\/p>\n

.\/welding-electric:<\/em>
\n 230_wameta-tig-1600_start_a.wav<\/em>
\n 231_wameta-tig-1600_start-run_a.wav<\/em><\/p>\n

.\/x_smithy-binaural:<\/em>
\n 233_evening-at-the-smithy_binaural_a.wav<\/em>
\n 234_leaving-the-smithy_binaural_a.wav<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"

A list of\u00a0filenames of the recordings we made with Jesse last weekend (excluding b,c,\u2026 versions of\u00a0the same tools\/work-phases). I’ve been mastering the samples using Logic Pro X. After a frustrating\u00a0day with\u00a0tutorials I found a decent\u00a0workflow. We recorded two files on each take. A master and secondary-file in\u00a0-6db (Tascam Dr-40 can simultaneously\u00a0write\u00a0two files from the same … <\/p>\n

Continue reading “20161130”<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":""},"categories":[4],"tags":[104,99,219],"class_list":["post-980","post","type-post","status-publish","format-standard","hentry","category-log","tag-jesse-sipola","tag-ore-e-refineries","tag-sound-of-work-blacksmith"],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/eero.storijapan.net\/docfolio\/wp-json\/wp\/v2\/posts\/980","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/eero.storijapan.net\/docfolio\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/eero.storijapan.net\/docfolio\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/eero.storijapan.net\/docfolio\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/eero.storijapan.net\/docfolio\/wp-json\/wp\/v2\/comments?post=980"}],"version-history":[{"count":0,"href":"https:\/\/eero.storijapan.net\/docfolio\/wp-json\/wp\/v2\/posts\/980\/revisions"}],"wp:attachment":[{"href":"https:\/\/eero.storijapan.net\/docfolio\/wp-json\/wp\/v2\/media?parent=980"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/eero.storijapan.net\/docfolio\/wp-json\/wp\/v2\/categories?post=980"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/eero.storijapan.net\/docfolio\/wp-json\/wp\/v2\/tags?post=980"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}